View P1120-3SDESV_4822633.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
* Pletronics' P113SD Series is a quartz crystal controlled precision square wave generator with a CMOS output. * The P113SD series will directly interface TTL devices also. * Greatly reduces RFI and EMI system sensitivity * Minimizes RFI radiation, eases meeting FCC Class B emissions standards. * Capable of driving up to 50pF capacitive loads * Tube packaging is available.
* * * * * * * * *
70 to 180 MHz Full Size Thru-Hole DIP package Enable/Disable Function Disable function includes low standby power mode 3rd Overtone Crystals used Improved circuit to minimize oscillator issues such as multi-mode output signal. Low Jitter Has internal bypass capacitor on the Vcc lead 5x7 mm LCC ceramic oscillator inside
Pletronics Inc. certifies this device is in accordance with the RoHS (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 4.0 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e1 or e2
Absolute Maximum Ratings:
Parameter VCC Supply Voltage Vi Vo Input Voltage Output Voltage Unit -0.5V to +7.0V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC The thermal resistance junction to board is 120oC/Watt depending on the solder pads, ground plane and construction of the PCB.
Product informatin is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necesarily include testing of all parameters.
Copyright (c) 2005, 2006, 2007 Pletronics Inc.
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
Part Number:
P11 45 -3SD ES V -125.0M -30 -XX Internal code or blank Output Load Capacitance Blank = 15pF maximum 30 = 30pF maximum - <160 MHz only 50 = 50pF maximum - <120 MHz only Frequency in MHz Supply Voltage VCC V = 3.3V _ 10% + Enhanced Specifications (apply in the order shown) E = Temperature range -40 to 85oC S = Symmetry 45%/55% at 50% of VCC Series Model Frequency Stability 45 = + 50 ppm _ 44 = + 25 ppm _ 20 = + 20 ppm _ Series Model 5 4 2 P3S none Marking
fff.fff M V, B or D
E S
Part Marking:
PLE P3Sxsss fff.fff M yywwaLF Where: x sss fff.fff yywwa LF = Frequency stability = Enhanced specification and voltage = frequency in MHz = Date code = Lead Free
Pletronics may ship the following combinations without notice (this is an enhanced specified device) 44 (25 ppm) stability parts when 45 (50 ppm) was ordered 20 (20 ppm) stability parts when 45 (50 ppm) or 44 (25 ppm) was ordered. E temperature range parts when extended was not ordered. S symmetry parts when 40/60% symmetry was ordered. Pletronics may ship parts that are not marked for extended temperature range but were tested for extended temperature range, a Certificate of Conformance will accompany these parts.
www.pletronics.com
425-776-1880
2
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
Electrical Specification for 3.30V _10% over the specified temperature range +
Item Frequency Range Frequency Accuracy "45" "44" "20" Output Waveform Output High Level Output Low Level Output Symmetry 90 40 45 Jitter Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Standby Current ICC Enable time Disable time Start up time Operating Temperature Range 50 70 -10 -10 0 -40 Storage Temperature Range -55 Min 70 -50 -25 -20 Max 180 +50 +25 +20 CMOS 10 60 55 0.6 2.5 30 +10 +10 3 100 100 10 +70 +85 +125
0
Unit MHz ppm
Condition
For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures
% % % % pS RMS pS RMS Kohm % % uA uA uA nS nS mS
o
of VCC of VCC
(See load circuit) (See load circuit) (See load circuit) Standard
at 50% point of VCC for "S" option parts
12 KHz to 20 MHz from the output frequency 10 Hz to 1 MHz from the output frequency to VCC of VCC applied to pad 1 of VCC applied to pad 1 Pad 1 low, device disabled
Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Time for output to reach specified frequency Standard Temperature Range Extended Temperature Range "E" Option
C C C
o
o
Typical phase-noise characteristics at 106.25MHz
dBc/Hz
-20 -40 -60 -80 -100 -120 -140 -160 -180 10 1,000 100,000 10,000,000
Frequency (Hz)
www.pletronics.com
425-776-1880
3
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
Electrical Specification for 3.30V _10% over the specified temperature range +
Item VOUT High (VOH) VOUT Low (VOL) Output TRISE and TFALL Min 2.5 VCC Supply Current (ICC) Typ 2.7 0.3 0.8 1.0 1.2 2.0 1.2 1.3 1.4 2.0 2.1 2.1 3.0 30 25 20 18 40 32 26 22 44 34 29 Max 0.4 1.5 2.0 2.5 3.0 2.0 2.5 3.0 4.0 3.5 4.5 5.0 70 60 50 40 90 70 57 45 80 65 50 Unit V V nS nS nS nS nS nS nS nS nS nS nS mA mA mA mA mA mA mA mA mA mA mA Condition VCC = 2.97V, IOH = +8 mA VCC = 2.97V, IOL = -8 mA >130 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz >130 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz >130 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz >130 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz >110 MHz and <=130 MHz >80 MHz and <=110 MHz <=80 MHz CLOAD = 50 pF CLOAD = 30 pF CLOAD = 15 pF CLOAD = 50 pF 10% to 90% of VCC See Load Circuit CLOAD =30 pF 10% to 90% of VCC See Load Circuit CLOAD = 15 pF 10% to 90% of VCC See Load Circuit
Specifications with Pad 1 E/D open circuit
www.pletronics.com
425-776-1880
4
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
Load Circuit and Test Waveform
Vhigh 90% * Vcc 50% * Vcc 10% * Vcc Vlow Ground
Trise
Symmetry
Tfall
Reliability: Environmental Compliance
Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition A MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A
ESD Rating
Model Human Body Model Charged Device Model Minimum Voltage 1500 1000 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
5
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
Mechanical:
Inches
PLE
mm 20.00 +0.13 _ 12.37 +0.13 _ 5.72 +0.28 _ 6.35 0.51 0.79 2.37 7.62 15.24 2.37
A B C D1 E1 F1
0.787 +0.005 _ 0.487 +0.005 _ 0.225 +0.011 _ 0.250 0.020 0.031 0.094 0.300 0.600 0.094
1
Cover: Kovar Electroless Nickel Plated 1 inch (25 m) typical Resistance welded to base Label: White Kapton with Black Letters -or-Blue Epoxy heat cure ink with laser marked lettering
G1 Base: Kovar Glass to metal sealed leads H1 I1 J1
Pin 7 Connected to case Not to scale
Nominal dimension
Pad 1
Function Output Enable/Disable Ground (GND) Output Supply Voltage (VCC)
Note When this pad is not connected the oscillator shall operate. When this pad is logic low the output will be inhibited (high impedance state.) Recommend connecting this pad to VCC if the oscillator is to be always on.
7 8 14
Recommend connecting appropriate power supply bypass capacitors as close as possible.
Layout and application information
For Optimum Jitter Performance, Pletronics recommends: * a ground plane under the device * no large transient signals (both current and voltage) should be routed under the device * do not layout near a large magnetic field such as a high frequency switching power supply * do not place near piezoelectric buzzers or mechanical fans.
PCB Mounting (typical for lead free processing)
Hand soldering is recommended. Wave solder at 255oC to 280oC with maximum wave exposure of 15 seconds Reflow solder maximum exposure of 245oC for 15 seconds Soldering done in a nitrogen atmosphere enhances the solder joint quality.
www.pletronics.com
425-776-1880
6
P113SD Series 3.3 V
CMOS Clock Oscillators
July 2007
IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's standard warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. W, Suite H Lynnwood, Washington 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2005, 2006, 2007 Pletronics Inc.
www.pletronics.com
425-776-1880
7

▲Up To Search▲

Price & Availability of P1120-3SDESV

	To Download P1120-3SDESV Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .